Availability: | |
---|---|
Quantity: | |
Section 1 Product and company identification
Product name: TR4021
Manufacturer' s name: Dongguan GaoFei Electronic Technology Co.,Ltd
Address: 3Floor, Building No.2, No.26, Guanzhang road, Shijing industrial area, Dongcheng District, Dongguan, China
Tel: (86)0769-22655045
Fax: (86)0769-23600267
Date: Feb. 5.2016
Section 2 Composition/information on ingredients
Chemical Components | %(Optional) | cas No. |
Polyethylene terephthalate/PET | PET carrier | 25308 - 59 - 9 |
Carbon Black | 10 - 20% | 1333 - 86 - 4 |
Paraffin wax | 70 - 85% | 8002 - 74 - 2 |
Resin & etc | 5 - 15% | 65997 - 11 - 7 |
Section 3 Hazardous information
Risks for human health:
This product is relatively innocuous substance and is not expected to cause harm. Mechanical irritation of the eyes, nose and throat may occur if slitting. Suggest 10mg/Cu.M for inert or nuisance particulate if debris is generated during slitting, etc
Environmental risks: No data available
Section 4 First aid measures
Route of Entry: Inhalation Skin Ingestion (Possible but very unusual)
Ingestion: If swallowed, get medical attention.
Skin: If irritations are felt after contact with skin, wash with plenty of mild soap and water.
Eyes: In case of contact with eyes, rinse immediately with plenty of water for at least 15minutes and seek medical advice.
Signs and Symptoms of Exposure : None
Medical Conditions(Generally aggravated by Exposure) : None
Section 5 Fire-fighting measures
Extinguishing media: CO2, Water, Dry Powder, Foam
Special fire fighting procedures: For large quantities involved in a fire, firefighters should wear self-contained breathing apparatus and protective clothing.
Section 6 Accidental release measures
Not applicable
Section 7 Handling and storage
Handling: Wash through after handling and before eating or smoking. Eye protection is recommended if ribbon is being slit or cut. Use adequate ventilation nuisance particles are being generated.
Storage: Should be stored in dark and cool place. sheltered from Direct light.
Short term storage(24H): Temperature -20~55℃, Humidity 10~85%RH.
Long term storage(1 Year): Temperature 0~40℃, Humidity 30~90%RH. Avoid proximity of flame and heat sources. Store 24 hours in room temperature before slitting.
Section 8 Exposure controls/personal protection
Technical protection measures: This product will slowly photo degrade with UV light exposure, shelter from light.
Personal protection equipment: Goggle for eye protection and particle mask for nose and throat protection during slitting process.
Section 9 Physical and chemical properties
Property | Value |
Appearance | Ink coated film |
Color | black |
Odor | little or no odor |
Change in physical | Not applicable |
Melting point | Ink, 70°C/Film, 258°C |
Boiling point | Not applicable |
Flash point | >150°C |
Ignition temperature | Not applicable |
Danger of explosion | Not applicable |
Explosion limit | Not applicable |
Vapor pressure(Air=1) | Not applicable |
Solubility | Not applicable |
PH - value | Not applicable |
Specific gravity(H2O=1) | About 1.37 - 1.38 |
Section 10 Stability and reactivity
Stability: Stable
Hazardous decomposition products: Terephthalic acid, CO and aldehyde above 300℃
Byproducts: CO, CO2, NOX and H2O etc.
Section 11 Toxicological information
Substance | Symbol | Limit (ppm) |
Lead | Pb | 1000 |
Cadmium | Cd | 100 |
Chromium | Cr⁺⁶ | 1000 |
Mercury | Hg | 1000 |
PBB | - | 1000 |
PBDE | - | 1000 |
Health effects | - | None known |
Acute toxicity | - | Not found |
Others information | - | The TTR will contain levels below those listed (the European Union’s RoHS Legislation Directive 2002/95/EC). |
Section 12 Ecological information
Aquatic toxicity: Not available Biodegradability: Not available Effect on effluent treatment: Biodegradability
Section 13 Disposal consideration
Disposal definition: Scrap film from slitting, ribbon after printing barcode.
Waste disposal: Disposal in accordance with local state and federal regulations.
Section 14 Transport information
No special
Section 15 Regulatory information
No special
Section 16 Other information
No liability is accepted for any injury, loss damage or cost arising directly or indirectly from the use of any information contained within this MSDS since the customer”s treatment of the product is necessarily out of our control.
The data complied above is based on current knowledge and experience. The purpose of this Safety Date Information is to describe the products in terms of their safety requirements, The data does not signify any warranty with regard to the products workability.