English
Offer High-Performance Barcode Solutions
loading
| Availability: | |
|---|---|
| Quantity: | |
Components
Thermal Transfer Ribbons chemical composition
Component | Percentage |
Carbon | 10-20% |
Black | 5-15% |
Paraffin wax | - |
Resin & etc | 70-85% |
PET | - |
Hazardous material information
This product is non-toxic and harmless, and will not cause harm to the human body. During slitting, there may be slight irritation to the eyes, nose, and throat.
First aid measures
If ingested by mistake, please seek medical attention as soon as possible.
Skin contact: If there is slight irritation to the skin, please wash easily with soap.
Eyes: If your eyes come into contact with the carbon belt, please rinse immediately with water for 15 minutes and seek medical attention as soon as possible.
Fire extinguishing measures
Fire extinguisher types: carbon dioxide, water, dry ice special fire extinguishing measures
If there is a large-scale fire, firefighters need to wear tl breathing apparatus and protective clothing.
Emergency handling not applicable
After storing and touching the carbon tape, please wash your hands carefully. When cutting the carbon tape, pay attention to eye protection, as there may be particulate matter produced during cutting.
It should be stored in a cool place, avoiding direct sunlight. Short term storage temperature:
20-55 degrees Celsius, humidity: 10% -85% RH. Long term (1 year) storage temperature: 0-40 degrees Celsius, humidity: 30% -90% RH. Try to avoid light and heat sources as much as possible, and store indoors for 24 hours before cutting.
Personal protective measures: Wear eye masks, masks, and masks to prevent small particles generated during slitting from spraying into the eyes or inhaling.
Category | Property | Value |
Physics | Appearance | Ink coated film |
Odor | Little or no odor | |
Melting point (Ink) | 80°C | |
Melting point (Film) | 258°C | |
Flash point | >150°C | |
Danger of explosion | Not applicable | |
Vapor pressure (Air=1) | Not applicable | |
PH-value | Not applicable | |
Stability | Stability | Stable |
Hazardous Decomposition | CO and aldehyde above 300°C | |
Byproducts | CO, CO₂, Nitrogen oxides, water | |
Toxic Substances | Health impact | None |
Acute toxicity | None | |
OTHER | Product contains: | - |
Lead (Pb) | 1000 ppm | |
Cadmium (Cd) | 100 ppm | |
Chromium (Cr⁶⁺) | 1000 ppm | |
Mercury (Hg) | 1000 ppm | |
PBB | 1000 ppm | |
PBDE | 1000 ppm | |
Additional Properties | Color | Black |
Change in physical | Not applicable | |
Boiling point | Not applicable | |
Ignition temperature | Not applicable | |
Explosion limit | Not applicable | |
Solubility | Not applicable | |
Specific gravity (H₂O=1) | About 1.37-1.38 |
Aquatic toxicity: Not available
Biodegradability: Not
Effect on effluent treatment：Biodegradability available
Disposal definition: Scrap film from slitting, ribbon after printing barcode Waste disposal Disposal in accordance with local state and federal regulations.
Due to the different usage situations of each individual, our company does not bear any damage or loss caused by the substances contained in the MSDS form. Based on experience and our existing data, the above table only declares that our products comply with relevant safety standards and does not guarantee the performance of our products.
